Trouble loading stack file in Community 7.0
Moderators: FourthWorld, heatherlaine, Klaus, kevinmiller, robinmiller
-
- Posts: 7
- Joined: Sun May 18, 2014 10:54 pm
Trouble loading stack file in Community 7.0
Hi guys,
Downloaded V 7 DP5, modified a stack on which I'd been working for a while, saved it, and now am getting the "file is not a stack" message when I try to open it. Any clues would be much appreciated. There's no backup file for some reason, so I'm really lost. Thanks.
Downloaded V 7 DP5, modified a stack on which I'd been working for a while, saved it, and now am getting the "file is not a stack" message when I try to open it. Any clues would be much appreciated. There's no backup file for some reason, so I'm really lost. Thanks.
-
- VIP Livecode Opensource Backer
- Posts: 3901
- Joined: Sat Mar 24, 2007 2:54 am
- Location: Palo Alto
Re: Trouble loading stack file in Community 7.0
Hi SillySoviet,
Welcome to the forum
Bad start for LC 7 not to say "they told you to make backups" but they did.
7.0 is still a DP (Developer Preview) and is unstable. They post the dp/rc for us to see if we can break them (and it looks like you did a great job of it!).
Try liveCode 6.6.1 it was the last "stable" release.
Oh,
Or is it 7.0 can't open the stack?
Simon
Welcome to the forum
Bad start for LC 7 not to say "they told you to make backups" but they did.
7.0 is still a DP (Developer Preview) and is unstable. They post the dp/rc for us to see if we can break them (and it looks like you did a great job of it!).
Try liveCode 6.6.1 it was the last "stable" release.
Oh,
That message usually occurs when you try to open a stack that was save in a later version. Are you trying to open your stack with a version less than 7.0?..."file is not a stack" message when I try to open it.
Or is it 7.0 can't open the stack?
Simon
I used to be a newbie but then I learned how to spell teh correctly and now I'm a noob!
-
- Posts: 7
- Joined: Sun May 18, 2014 10:54 pm
Re: Trouble loading stack file in Community 7.0
Simon, you saved my faith in this community! So first: thank you for responding.
I wish I had been that smart so as to save a backup. At this point, I've tried opening the stack in 6.6.1, 6.5, and 7.0. Nothing works.
I can't stand losing hours of work to this kind of lunacy, but then again it's my fault for not saving multiple versions. Good lesson I guess.
Thanks again for your note.
I wish I had been that smart so as to save a backup. At this point, I've tried opening the stack in 6.6.1, 6.5, and 7.0. Nothing works.
I can't stand losing hours of work to this kind of lunacy, but then again it's my fault for not saving multiple versions. Good lesson I guess.
Thanks again for your note.
-
- VIP Livecode Opensource Backer
- Posts: 3901
- Joined: Sat Mar 24, 2007 2:54 am
- Location: Palo Alto
Re: Trouble loading stack file in Community 7.0
If you like you could post the stack here to see if anyone can get it going again.
Oh, actually I think you need 10 post to add attachments and url's.
But post it elsewhere and I can take a look.
I think for now 6.6.1 is for you, but there are a lot of new cool things coming soon!
Simon
Oh, actually I think you need 10 post to add attachments and url's.
But post it elsewhere and I can take a look.
I think for now 6.6.1 is for you, but there are a lot of new cool things coming soon!
Simon
I used to be a newbie but then I learned how to spell teh correctly and now I'm a noob!
Re: Trouble loading stack file in Community 7.0
Simon wrote:Hi SillySoviet,
Welcome to the forum
Bad start for LC 7 not to say "they told you to make backups" but they did.
7.0 is still a DP (Developer Preview) and is unstable. They post the dp/rc for us to see if we can break them (and it looks like you did a great job of it!).
Try liveCode 6.6.1 it was the last "stable" release.
Oh,That message usually occurs when you try to open a stack that was save in a later version. Are you trying to open your stack with a version less than 7.0?..."file is not a stack" message when I try to open it.
Or is it 7.0 can't open the stack?
Simon
Community 7.0 DP6 has not updated over a month, when a new version is released it ?
-
- Posts: 7
- Joined: Sun May 18, 2014 10:54 pm
Re: Trouble loading stack file in Community 7.0
I still can't access that file, and I'm hoping with the 7.0 update I will be able to. Otherwise, it's valuable time lost. Will be super-disappointing.
-
- VIP Livecode Opensource Backer
- Posts: 9867
- Joined: Sat Apr 08, 2006 7:05 am
- Location: Los Angeles
- Contact:
Re: Trouble loading stack file in Community 7.0
Was your earlier work done with the Commercial Edition? If so, had you set a password on the stack? The Community edition doesn't understand the format of password-protected stacks, and in some versions will exhibit the behavior you describe.
If instead you've stumbled across one of the very rare cases of actual file corruption, your scripts are still readable:
With that you'll lose the objects, but at least be able to retrieve the scripts.
If instead you've stumbled across one of the very rare cases of actual file corruption, your scripts are still readable:
Code: Select all
on mouseUp
answer file "Select a stack file:"
if it is empty then exit to top
put url ("file:"&* it) into fld "StackDump"
end mouseUp
Richard Gaskin
LiveCode development, training, and consulting services: Fourth World Systems
LiveCode Group on Facebook
LiveCode Group on LinkedIn
LiveCode development, training, and consulting services: Fourth World Systems
LiveCode Group on Facebook
LiveCode Group on LinkedIn
Re: Trouble loading stack file in Community 7.0
I am finding LCC 7.0.4 rather unstable on Win7 SP1, with a crash every 1-2 days while doing development. And the most likely event to cause LC to fail is on: Save This stack! when the stack I am trying to save is corrupted. LC simply refuses to open it (silently). You can recover some scripts from text editing the LC-unreadable stack file, and you can resume from the previously saved stack file (stackname.livecode~) by removing "~" from its extension. But it still means losing the maximum amount of work between saves.
Does anyone know of a reliable way to Save This Stack in LCC 7?
Does anyone know of a reliable way to Save This Stack in LCC 7?
-
- VIP Livecode Opensource Backer
- Posts: 9867
- Joined: Sat Apr 08, 2006 7:05 am
- Location: Los Angeles
- Contact:
Re: Trouble loading stack file in Community 7.0
It may be helpful to use the current version, as it will contain any fixes implemented since the version you're using.
Since 7.0.4 there have been eight builds; the current build is 7.0.6 Stable.
Given the number of Windows users, it seems the problem may not be so easily reproducible as just saving alone; that would have been picked up in the team's automated testing tool, and many other users as well.
I suspect there may be an issue with a specific element in your stack, possibly bad image data or odd bytes in a field object. If so, replacing that one object should make the issue go away.
Have you filed a bug report on this? How many cards in the stack, and roughly how many objects?
Since 7.0.4 there have been eight builds; the current build is 7.0.6 Stable.
Given the number of Windows users, it seems the problem may not be so easily reproducible as just saving alone; that would have been picked up in the team's automated testing tool, and many other users as well.
I suspect there may be an issue with a specific element in your stack, possibly bad image data or odd bytes in a field object. If so, replacing that one object should make the issue go away.
Have you filed a bug report on this? How many cards in the stack, and roughly how many objects?
Richard Gaskin
LiveCode development, training, and consulting services: Fourth World Systems
LiveCode Group on Facebook
LiveCode Group on LinkedIn
LiveCode development, training, and consulting services: Fourth World Systems
LiveCode Group on Facebook
LiveCode Group on LinkedIn
Re: Trouble loading stack file in Community 7.0
Hi,geofhaigh wrote:I am finding LCC 7.0.4 rather unstable on Win7 SP1, with a crash every 1-2 days while doing development. And the most likely event to cause LC to fail is on: Save This stack! when the stack I am trying to save is corrupted. LC simply refuses to open it (silently). You can recover some scripts from text editing the LC-unreadable stack file, and you can resume from the previously saved stack file (stackname.livecode~) by removing "~" from its extension. But it still means losing the maximum amount of work between saves.
Does anyone know of a reliable way to Save This Stack in LCC 7?
I had a string of frequent crashes in LC 7.0.5 on Win7. I never pinned down the cause, but found that reinstalling LC helped. (If you have old versions to uninstall, do that first.)
Tom