Zoom IDE
Moderators: FourthWorld, heatherlaine, Klaus, kevinmiller, robinmiller
Re: Zoom IDE
As far as I know, you can only zoom in on pixels, like so...
However, if that line (or any pixels) are close enough to objects on your stack, they will be zoomed too...
Re: Zoom IDE
Am I the only one struggling with the inability to resize the view of my development. I develop on a laptop and having to drag windows around in order to see the full content of a stack seems.....laborious?
Re: Zoom IDE
If it makes you feel any better, I don't think your the only one that has that problem with the IDE floating in front of other things you may need to see. I don't use the newer IDE often, but on my laptop when I do use it, I use Andy P.'s excellent tinyIDE plugin.
Another IDE plugin that suits my style of working in the newer IDE would be Richard's 'devolution'. Both are minimalistic space takers, which I find hugely beneficial on laptop space.
Another IDE plugin that suits my style of working in the newer IDE would be Richard's 'devolution'. Both are minimalistic space takers, which I find hugely beneficial on laptop space.
Re: Zoom IDE
Thanks for the response. I’ll take a look. Just seems a little odd that an IDE has no zoom in/out option. Every IDE I have ever used had this function to allow you to work on larger targets than the development environment. I’m liking the product but finding the IDE....clunky?
Re: Zoom IDE
In other developement environments, the IDE is usually setup as a single window, with the windows and forms you are working on displayed as representations of the actual final window. As you've noticed, Lc is a bit different in this regard.
However, just like in most other IDEs, you can either close or minimize the other palettes in the default IDE layout. I actually find this useful for most of my dev work, since it allows me the ultimate in layout control of my tools.
If you don't actually feel like closing off palettes that might be in your way, you can always move them towards the bottom of your screen till the titles are just over the taskbar. This usually gives you quick access regardless of OS.
I work in Linux, there you can usually just 'shade' the window, like this... which leaves me all windows in place but with just title bars. I'm sure others using Lc have their own work flows to resolve the issue, but there isn't (as far as I know, I could be wrong!) any way to zoom in and out of the IDE because there aren't the usual reasons you might need to.
After all, the only part of the IDE that should be needed constantly is the main menu bar, and that takes up a small space in any location you feel like moving it to. Other IDEs require it to be at the top of the window because the IDE is a single monolithic entity
However, just like in most other IDEs, you can either close or minimize the other palettes in the default IDE layout. I actually find this useful for most of my dev work, since it allows me the ultimate in layout control of my tools.
If you don't actually feel like closing off palettes that might be in your way, you can always move them towards the bottom of your screen till the titles are just over the taskbar. This usually gives you quick access regardless of OS.
I work in Linux, there you can usually just 'shade' the window, like this... which leaves me all windows in place but with just title bars. I'm sure others using Lc have their own work flows to resolve the issue, but there isn't (as far as I know, I could be wrong!) any way to zoom in and out of the IDE because there aren't the usual reasons you might need to.
After all, the only part of the IDE that should be needed constantly is the main menu bar, and that takes up a small space in any location you feel like moving it to. Other IDEs require it to be at the top of the window because the IDE is a single monolithic entity
-
- VIP Livecode Opensource Backer
- Posts: 4003
- Joined: Sun Jan 07, 2007 9:12 pm
- Location: Bochum, Germany
Re: Zoom IDE
maybe scaleFactor helps
put this into the message box and hit returnit will shrink your stack, 1.0 is original size and so on
Although this only scales one stack at the time.
Kind regards
Bernd
put this into the message box and hit return
Code: Select all
set the scalefactor of stack "myStack" to 0.5
Although this only scales one stack at the time.
Kind regards
Bernd
Re: Zoom IDE
Ooh that helps. Thank you.bn wrote: ↑Thu Nov 29, 2018 5:15 pmmaybe scaleFactor helps
put this into the message box and hit returnit will shrink your stack, 1.0 is original size and so onCode: Select all
set the scalefactor of stack "myStack" to 0.5
Although this only scales one stack at the time.
Kind regards
Bernd
Re: Zoom IDE
Hm, that is an interesting line of thought Bernd! I'm so rarely using 6.6.x that I never use scale factor
You could also, from the messagebox, use something like
which should let you shrink any stack on the screen just by hovering over it, then hitting enter in the message box.
To reverse it, just type '1' instead of '.5'
You could also, from the messagebox, use something like
Code: Select all
set the scaleFactor of the mouseStack to .5
To reverse it, just type '1' instead of '.5'
-
- VIP Livecode Opensource Backer
- Posts: 9670
- Joined: Wed May 06, 2009 2:28 pm
- Location: New York, NY
Re: Zoom IDE
Jacque has an adorable magnifying glass. Perhaps if she sees this she will bring it to the fore.
Craig Newman
Craig Newman
-
- VIP Livecode Opensource Backer
- Posts: 7238
- Joined: Sat Apr 08, 2006 8:31 pm
- Location: Minneapolis MN
- Contact:
Re: Zoom IDE
The magnify example I wrote was for a specific use that requires some setup during development. I think it's in Sample Stacks still but it isn't an all-purpose tool.
LC has a magnify command built in, but it only works on images.
Jacqueline Landman Gay | jacque at hyperactivesw dot com
HyperActive Software | http://www.hyperactivesw.com
HyperActive Software | http://www.hyperactivesw.com
Re: Zoom IDE
The IDE needs some work in my opinion. Some strange behaviours when developing on Windows (not tried it on my Mac yet). Windows don’t seem to obey the conventional behaviours in the IDE - acting almost like modal windows in some respects by not moving behind windows you wish to bring to the front by clicking on them. Mainly the properties windows of the cards and stacks.
Might just be an adjustment needed on my part but it’s irritating me enough to mention it! Another thing I miss from other IDE environments include alignment assistants when dropping new fields, buttons etc onto a card.
I’m still evaluating the product and although I have a very tempting offer expiring today I’m still not sure if I can live with the IDE.
Might just be an adjustment needed on my part but it’s irritating me enough to mention it! Another thing I miss from other IDE environments include alignment assistants when dropping new fields, buttons etc onto a card.
I’m still evaluating the product and although I have a very tempting offer expiring today I’m still not sure if I can live with the IDE.
-
- VIP Livecode Opensource Backer
- Posts: 7238
- Joined: Sat Apr 08, 2006 8:31 pm
- Location: Minneapolis MN
- Contact:
Re: Zoom IDE
The IDE windows are palettes that float on top. They will stack among themselves but always do float above your working stacks. Typically if they are in the way I just drag them to the bottom of the screen or dismiss them. It is very easy to get the property inspector back by just double clicking an object with the edit tool. Other palettes can be opened again from the menus.
You can also close the tools palette and toggle between the browse and edit tools via keyboard shortcuts instead, so you only need to open it (from the menus) if you want to use one of the other tools during layout. Or you can collapse or hide different parts of it to get them out of the way using the gear icon at the top right.
You can also set the toolbar at the top to show only icons or only labels, which gives you more vertical space, or you can close it entirely.
There is an alignment tool in the property inspector. It only shows up if you have more than one object selected. Shift-click the objects you want to align, making sure that the first one is the one you want the others to align with. Double click one of the selected objects to open the property inspector and find the align pane, the icon looks like three horizontal lines with the left edges aligned. It's the last icon in the inspector.
You can also close the tools palette and toggle between the browse and edit tools via keyboard shortcuts instead, so you only need to open it (from the menus) if you want to use one of the other tools during layout. Or you can collapse or hide different parts of it to get them out of the way using the gear icon at the top right.
You can also set the toolbar at the top to show only icons or only labels, which gives you more vertical space, or you can close it entirely.
There is an alignment tool in the property inspector. It only shows up if you have more than one object selected. Shift-click the objects you want to align, making sure that the first one is the one you want the others to align with. Double click one of the selected objects to open the property inspector and find the align pane, the icon looks like three horizontal lines with the left edges aligned. It's the last icon in the inspector.
Jacqueline Landman Gay | jacque at hyperactivesw dot com
HyperActive Software | http://www.hyperactivesw.com
HyperActive Software | http://www.hyperactivesw.com