Spelling mistakes

Want to talk about something that isn't covered by another category?

Moderators: FourthWorld, heatherlaine, Klaus, kevinmiller, robinmiller

richmond62
Livecode Opensource Backer
Livecode Opensource Backer
Posts: 9358
Joined: Fri Feb 19, 2010 10:17 am
Location: Bulgaria

Spelling mistakes

Post by richmond62 » Tue Aug 11, 2020 9:46 am

The Documentation has quite a few spelling mistakes, which, considering that there are things called "spell checkers"
is a bit disgraceful and might give the wrong sort of impression to people.

"Program that accepts operating-system commands. The program a user uses to interact with the operating system, move files around, lauch applications, and so on."

Just the most recent example I stumbled upon.

richmond62
Livecode Opensource Backer
Livecode Opensource Backer
Posts: 9358
Joined: Fri Feb 19, 2010 10:17 am
Location: Bulgaria

Re: Spelling mistakes

Post by richmond62 » Tue Aug 11, 2020 10:47 am

While it is quite an easy exercise to open the PDF documentation and run it through a spell-checker, I am not
at all sure how that can then be "folded in" to the IDE.

Just a quick run through the first 100 pages indicates that there are several spelling mistakes,
several rather elementary grammatical mistakes and a high level of
inconsistency over whether to use American English or British English.

sphere
Posts: 1145
Joined: Sat Sep 27, 2014 10:32 am
Location: Earth, Except when i Jump

Re: Spelling mistakes

Post by sphere » Tue Aug 11, 2020 2:36 pm

Well I prefer British English then, the way we got it to learn at school (at least in the Netherlands).
And no 'slang' allowed either, like: Am instead of I'm or I am. (not that I think it would be used in descriptions but you never know)
Last edited by sphere on Tue Aug 11, 2020 3:46 pm, edited 2 times in total.

richmond62
Livecode Opensource Backer
Livecode Opensource Backer
Posts: 9358
Joined: Fri Feb 19, 2010 10:17 am
Location: Bulgaria

Re: Spelling mistakes

Post by richmond62 » Tue Aug 11, 2020 2:59 pm

sphere wrote:
Tue Aug 11, 2020 2:36 pm
Well i prefer British English then, the way we got it to learn at school (at least in the Netherlands).
And no 'slang' allowed either, like: Am instead of I'm or I am. (not that i think i would be used in descriptions but you never know)
Well, let us hope that in the Netherlands you are taught to use "I" for 'Ik' and not 'i'. 8)

As a person born in Scotland, went to school in England, and holding degrees from an English, an American and a Scots University
-
3degrees.jpg
-
Oof: and to think that for years I was trying to look like that. :)
-
I don't really care which variant of English is used,

[juist so lang as fowk that disnea thole til Scots caa it a dialeck o Inglis as they yaised tae.]

but what I cannot abide is "mid-Atlantic" English, where people who don't really understand British versus American do
a mix-and-match, and because they are in the middle of the Atlantic get their linguistic feet wet.

LiveCode seem to prefer American English (c.f. backGroundColor), but the documentation is inconsistent.

sphere
Posts: 1145
Joined: Sat Sep 27, 2014 10:32 am
Location: Earth, Except when i Jump

Re: Spelling mistakes

Post by sphere » Tue Aug 11, 2020 3:50 pm

richmond62 wrote:
Tue Aug 11, 2020 2:59 pm
Well, let us hope that in the Netherlands you are taught to use "I" for 'Ik' and not 'i'. 8)
Oeps, indeed you're correct. So I corrected my incorrect 'ik'.🙃

FourthWorld
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 9823
Joined: Sat Apr 08, 2006 7:05 am
Location: Los Angeles
Contact:

Re: Spelling mistakes

Post by FourthWorld » Tue Aug 11, 2020 3:58 pm

What is the URL to the pull request or bug report number you submitted on this?
Richard Gaskin
LiveCode development, training, and consulting services: Fourth World Systems
LiveCode Group on Facebook
LiveCode Group on LinkedIn

richmond62
Livecode Opensource Backer
Livecode Opensource Backer
Posts: 9358
Joined: Fri Feb 19, 2010 10:17 am
Location: Bulgaria

Re: Spelling mistakes

Post by richmond62 » Tue Aug 11, 2020 7:35 pm

FourthWorld wrote:
Tue Aug 11, 2020 3:58 pm
What is the URL to the pull request or bug report number you submitted on this?
I'm never quite sure why your comments seem to get on my nerves about 90% of the time?

[Probably because 90% of mine annoy you: whoops; truth hurts . . .

. . . self-knowledge is all very fine, up to a point. ]

Tomorrow is another day: and as my younger son stays in Los Angeles I know the day is yet young for you; but
round these parts it's "bedtime for babies" so, abusive post will have to wait until the morning. 8)

FourthWorld
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 9823
Joined: Sat Apr 08, 2006 7:05 am
Location: Los Angeles
Contact:

Re: Spelling mistakes

Post by FourthWorld » Tue Aug 11, 2020 8:19 pm

richmond62 wrote:
Tue Aug 11, 2020 7:35 pm
FourthWorld wrote:
Tue Aug 11, 2020 3:58 pm
What is the URL to the pull request or bug report number you submitted on this?
I'm never quite sure why your comments seem to get on my nerves about 90% of the time?

[Probably because 90% of mine annoy you: whoops; truth hurts . . .

. . . self-knowledge is all very fine, up to a point. ]

Tomorrow is another day: and as my younger son stays in Los Angeles I know the day is yet young for you; but
round these parts it's "bedtime for babies" so, abusive post will have to wait until the morning. 8)
So I'll all take that to mean, "I haven't."

I don't read the manual much, and I haven't noticed misspellings in the section I have, which is why I asked. A few examples go a long way to understanding the problem, and a bug report is, as you know, the step that makes them actionable.

The docs have a long history, and many seeming misspellings are the result of the various conversion processes used over the years. Some of them aren't actually misspellings at all, when you look at the source, but merely misapplied or incomplete tagging and/or escaping in the newer HTML.

Without examples it's hard to hunt them down. With examples everything is easier, but the remedy may not be as simple as it might seem to someone who's never worked on the LC documentation. Formats may not be what you're used to, so suggestions like "just run a spelling checker" may not apply.
Richard Gaskin
LiveCode development, training, and consulting services: Fourth World Systems
LiveCode Group on Facebook
LiveCode Group on LinkedIn

richmond62
Livecode Opensource Backer
Livecode Opensource Backer
Posts: 9358
Joined: Fri Feb 19, 2010 10:17 am
Location: Bulgaria

Re: Spelling mistakes

Post by richmond62 » Tue Aug 11, 2020 8:42 pm

Ther's more than spelling mistakes, there are elementary grammatical mistakes.
If you can point me to a way to sort out ALL versions of the Documentation (i.e, not just the PDF)
I'd like to think I can sort out 98% relatively quickly.

I would not be so daft as to mention 100%

FourthWorld
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 9823
Joined: Sat Apr 08, 2006 7:05 am
Location: Los Angeles
Contact:

Re: Spelling mistakes

Post by FourthWorld » Tue Aug 11, 2020 8:56 pm

richmond62 wrote:
Tue Aug 11, 2020 8:42 pm
Ther's more than spelling mistakes, there are elementary grammatical mistakes.
If you can point me to a way to sort out ALL versions of the Documentation (i.e, not just the PDF)
I'd like to think I can sort out 98% relatively quickly.

I would not be so daft as to mention 100%
That's an amazing offer - thanks!

Here ya' go:
https://github.com/livecode/livecode/tree/develop/docs
Richard Gaskin
LiveCode development, training, and consulting services: Fourth World Systems
LiveCode Group on Facebook
LiveCode Group on LinkedIn

richmond62
Livecode Opensource Backer
Livecode Opensource Backer
Posts: 9358
Joined: Fri Feb 19, 2010 10:17 am
Location: Bulgaria

Re: Spelling mistakes

Post by richmond62 » Wed Aug 12, 2020 12:44 pm

That's an amazing offer - thanks!
I wouldn't rush to thank me just yet.

So . . . if I download "all that stuff" from the GIT hub, presumably I can just
be 'incredibly goofy' and run each constituent document through a DECENT spell checker & grammar checker
and save the results?

Obviously (!) I will NOT allow that to run automatically as machines are machines, and human language being what it is . . .

FourthWorld
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 9823
Joined: Sat Apr 08, 2006 7:05 am
Location: Los Angeles
Contact:

Re: Spelling mistakes

Post by FourthWorld » Wed Aug 12, 2020 5:34 pm

A spelling checker will catch some of those, but please believe that I have no reason to mislead you about the formatting issues, which comprise most of the errant Dictionary entries I've seen.

With a proposed change affecting so many files, it may be best to seek guidance from the maintainers on the best way to proceed before diving in. If you file a bug report on the spelling issues, and describe your plan for addressing them, they'll be able to reply with any details needed to do that well.
Richard Gaskin
LiveCode development, training, and consulting services: Fourth World Systems
LiveCode Group on Facebook
LiveCode Group on LinkedIn

richmond62
Livecode Opensource Backer
Livecode Opensource Backer
Posts: 9358
Joined: Fri Feb 19, 2010 10:17 am
Location: Bulgaria

Re: Spelling mistakes

Post by richmond62 » Thu Aug 13, 2020 9:42 am

It would be useful to know what format the suffix .lcdoc refers to.

Is this a LiveCode specific document format or just a text file which has had ".lcdoc" bunged on the end of it?

Opening an .lcdoc document with LibreOffice allowed mt to correct the spelling and so on, and
having exported the result as a text docuement I just appended .lcdoc to it, and the format appeared to be exactly as per the original.

The only "problem" I can see is that going through all those documents is going to be tedious: but probably nothing that
some half-decent music and a couple of cups of coffee won't make bearable. 8)

bn
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 3999
Joined: Sun Jan 07, 2007 9:12 pm
Location: Bochum, Germany

Re: Spelling mistakes

Post by bn » Thu Aug 13, 2020 7:17 pm

Hi Richmond,

here is the "how to" of "Contributing to LiveCode Documentation"

https://github.com/livecode/livecode/bl ... to_docs.md

If you plan on doing a pull-request change just the stuff you want change in the document instead of pasting the corrected version wholesale into the document. The difference being that for the reviewer in the latter case everything is "new" when reviewing, in the former case the reviewer will see right away just the changes to the existing document.

Kind regards
Bernd
Last edited by bn on Thu Aug 13, 2020 8:17 pm, edited 1 time in total.

richmond62
Livecode Opensource Backer
Livecode Opensource Backer
Posts: 9358
Joined: Fri Feb 19, 2010 10:17 am
Location: Bulgaria

Re: Spelling mistakes

Post by richmond62 » Thu Aug 13, 2020 8:15 pm

Thank you for that.

Post Reply

Return to “Off-Topic”