Zoom IDE

LiveCode is the premier environment for creating multi-platform solutions for all major operating systems - Windows, Mac OS X, Linux, the Web, Server environments and Mobile platforms. Brand new to LiveCode? Welcome!

Moderators: Klaus, FourthWorld, heatherlaine, robinmiller, kevinmiller

Markm49uk
Posts: 21
Joined: Sat Nov 24, 2018 4:47 pm

Re: Zoom IDE

Post by Markm49uk » Fri Nov 30, 2018 10:26 pm

Thanks. I don’t mean simple alignment tools like you mentioning mean dynamic alignment tools that appear when you move a field or object around like you can see here.....https://youtu.be/r1UOx0vo_Jc at around the 25 second mark. Can you configure this?

bogs
Posts: 2375
Joined: Sat Feb 25, 2017 10:45 pm

Re: Zoom IDE

Post by bogs » Fri Nov 30, 2018 10:56 pm

I believe someone wrote a plugin to do just that thing, if I'm not very much mistaken it may even be in the user sample sharing.
Image

jacque
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 4697
Joined: Sat Apr 08, 2006 8:31 pm
Location: Minneapolis MN
Contact:

Re: Zoom IDE

Post by jacque » Fri Nov 30, 2018 10:57 pm

Try this in the message box:

Code: Select all

set the raisepalettes to false
Doesn't seem to work on Mac but may work on Windows.
Jacqueline Landman Gay | jacque at hyperactivesw dot com
HyperActive Software | http://www.hyperactivesw.com

FourthWorld
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 6210
Joined: Sat Apr 08, 2006 7:05 am
Location: Los Angeles
Contact:

Re: Zoom IDE

Post by FourthWorld » Fri Nov 30, 2018 11:24 pm

jacque wrote:
Fri Nov 30, 2018 10:57 pm
Try this in the message box:

Code: Select all

set the raisepalettes to false
Doesn't seem to work on Mac but may work on Windows.
Yes, works as described on Linux and Windows, though it doesn't really make much sense as palette windows are distinguished by their always-on-top behavior. Turn that off and they're effectively the same a modeless.

As for the IDE windows, yes, most are palettes and as such will float on top of non-palette windows, with one exception: on Windows and Linux revMenubar has a mode of 2 (non-editable toplevel). I think this was to avoid annoying submarining of the drag bar of one's own stacks beneath it. But it does make it feel funky to me, and I don't know why they chose to introduce this platform inconsistency.
Richard Gaskin
Community volunteer LiveCode Community Liaison

LiveCode development, training, and consulting services: Fourth World Systems: http://FourthWorld.com
LiveCode User Group on Facebook : http://FaceBook.com/groups/LiveCodeUsers/

bogs
Posts: 2375
Joined: Sat Feb 25, 2017 10:45 pm

Re: Zoom IDE

Post by bogs » Sat Dec 01, 2018 1:41 pm

FourthWorld wrote:
Fri Nov 30, 2018 11:24 pm
Yes, works as described on Linux and Windows, though it doesn't really make much sense as palette windows are distinguished by their always-on-top behavior. Turn that off and they're effectively the same a modeless.
I think the various palettes and tool windows should act that way, just as they have in the past all the way back to Mc.

Aside from being the way anyone who started with Lc way back when would expect them to act, I find it pointless that they should prevent you from easily seeing any part of what your working on.

If you look at the IDE palettes like dialog boxes, for instance, there are cases where a dialog *should* prevent you from continuing unless you make a choice, and (where extra tool type dialogs are concerned) they should be modeless, allowing those to be open but non interfering.

Essentially, in the IDE, where the palettes we're talking about are extra tool types, they should not be forced to the top, any more than the menu bar is. They not only interfere with your working non palette windows, but with other windows that the IDE itself has, such as the dictionary, project browser, etc as certain palettes seem to dominate that top slot, like the *property inspector.

*Of course, my criticisms might carry less weight than others, since I only use this software on non supported distros of linux. In the past, this mattered far less, but it appears to becoming far more dominant with the newer IDEs.
Image

FourthWorld
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 6210
Joined: Sat Apr 08, 2006 7:05 am
Location: Los Angeles
Contact:

Re: Zoom IDE

Post by FourthWorld » Sat Dec 01, 2018 9:54 pm

MC's Tools palette was always on top. If it appeared otherwise that was a bug.

There are reasons OSes provide different window modes. Whether palettes should be universally abandoned is a matter of taste I suppose, but enough apps use them that we may want to reconsider before allowing all of them to submarine below the stacks we're using them on.

The various OS HIGs describe the role of palettes compellingly, at least enough that they have become common for certain tasks.

One of the difficulties with LC's Tools palette is that it's simply grown far too large, less a problem with its behavior than just having too much seldom-used stuff in it.
Richard Gaskin
Community volunteer LiveCode Community Liaison

LiveCode development, training, and consulting services: Fourth World Systems: http://FourthWorld.com
LiveCode User Group on Facebook : http://FaceBook.com/groups/LiveCodeUsers/

bn
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 3254
Joined: Sun Jan 07, 2007 9:12 pm
Location: Bochum, Germany

Re: Zoom IDE

Post by bn » Sat Dec 01, 2018 11:58 pm

Markm49uk wrote:
Fri Nov 30, 2018 10:26 pm
Thanks. I don’t mean simple alignment tools like you mentioning mean dynamic alignment tools that appear when you move a field or object around like you can see here.....https://youtu.be/r1UOx0vo_Jc at around the 25 second mark. Can you configure this?
bogs wrote:
Fri Nov 30, 2018 10:56 pm
I believe someone wrote a plugin to do just that thing, if I'm not very much mistaken it may even be in the user sample sharing.
Here is a postioning tool, best when used as plug-in.

To use it as plug-in move it to your plugin folder in my Livecode in folder Documents and restart LC. Then access it from the development menu -> plugins

Kind regards
Bernd
bnGuides_0_4.livecode.zip
(16.9 KiB) Downloaded 5 times
Last edited by bn on Sun Dec 02, 2018 2:57 pm, edited 2 times in total.

bogs
Posts: 2375
Joined: Sat Feb 25, 2017 10:45 pm

Re: Zoom IDE

Post by bogs » Sun Dec 02, 2018 12:28 am

bogs wrote:
Fri Nov 30, 2018 10:56 pm
I believe someone wrote a plugin to do just that thing, if I'm not very much mistaken it may even be in the user sample sharing.
bn wrote:
Sat Dec 01, 2018 11:58 pm
Here is a postioning tool, best when used as plug-in.
Bernd, I should have guessed it was yours :D
FourthWorld wrote:
Sat Dec 01, 2018 9:54 pm
MC's Tools palette was always on top. If it appeared otherwise that was a bug.
I suppose that is possible, the only way I've ever seen Mc work (the real original starter kit one) was as you see it here -
Selection_002.png
Mc Starter Kit, 2.5...
However, that aside, every version of Lc that I've used, from 1.1 to 7, NONE of them do this hokey stuff ~
Selection_003.png
And the dictionary says...WHAT?
Now, I am sure that people that design OSs have real good reasons for the stuff they declare is *right*, and if they declare palettes should be upside down and purple, well, I'm glad I don't design OSs :P

Since Lc isn't an Os though, and just between you and I and the fence post, since I don't think anyone using the IDE cares if you call it a palette or a bumbrush, i think it should act like a modeless bumbrush rather than a stuck up strumpet that can't get off the top of their throne.

Ahem. If you see what I mean.
Image

FourthWorld
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 6210
Joined: Sat Apr 08, 2006 7:05 am
Location: Los Angeles
Contact:

Re: Zoom IDE

Post by FourthWorld » Sun Dec 02, 2018 1:51 am

That's the menu bar. This is the Tools palette I was referring to, similar in layout and behavior to tools palettes in drawing programs.
Attachments
mc-tools.png
mc-tools.png (9.46 KiB) Viewed 220 times
Richard Gaskin
Community volunteer LiveCode Community Liaison

LiveCode development, training, and consulting services: Fourth World Systems: http://FourthWorld.com
LiveCode User Group on Facebook : http://FaceBook.com/groups/LiveCodeUsers/

bogs
Posts: 2375
Joined: Sat Feb 25, 2017 10:45 pm

Re: Zoom IDE

Post by bogs » Sun Dec 02, 2018 2:36 am

Yes it is. Bit redundant to have both a menubar with a complete tool bar, and a toolbar (which seems like the only thing I didn't get with Mc). Yours is not from the original Mc (noticing the dg on the bottom) :P

As I said in the post above -
bogs wrote:
Sun Dec 02, 2018 12:28 am
..the only way I've ever seen Mc work (the real original starter kit one) was as you see it here -
The reason is because you can't actually activate the tool palette in the real one pictured above.

When I first got hold of this version, though, I was unaware there even was a tool palette other than the one below the menu. Go figure.

I didn't in fact find out about the tool palette till much later, right around the time I finally got the stacks passwords taken out of the OSS version.
Image

Markm49uk
Posts: 21
Joined: Sat Nov 24, 2018 4:47 pm

Re: Zoom IDE

Post by Markm49uk » Tue Dec 04, 2018 12:59 pm

bn wrote:
Sat Dec 01, 2018 11:58 pm

Here is a postioning tool, best when used as plug-in.

To use it as plug-in move it to your plugin folder in my Livecode in folder Documents and restart LC. Then access it from the development menu -> plugins

Kind regards
Bernd

bnGuides_0_4.livecode.zip
Hey that is a super little plugin. Thank you for that.

bogs
Posts: 2375
Joined: Sat Feb 25, 2017 10:45 pm

Re: Zoom IDE

Post by bogs » Tue Dec 04, 2018 2:35 pm

Bernd does a lot of great stuff, you might also want to check the tinyDictionary he, Brian, and others put together.
Image

bn
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 3254
Joined: Sun Jan 07, 2007 9:12 pm
Location: Bochum, Germany

Re: Zoom IDE

Post by bn » Tue Dec 04, 2018 2:44 pm

bogs made me aware that bnGuides is not working in pre 7.0 LC versions

Here is a version that was saved in LC 5.5 format. (should also work in later versions of LC)

Did not test this version extensively but a first short test seemed to work

Kind regards

Bernd
bnGuides5.5.livecode.zip
(17.91 KiB) Downloaded 2 times

bogs
Posts: 2375
Joined: Sat Feb 25, 2017 10:45 pm

Re: Zoom IDE

Post by bogs » Tue Dec 04, 2018 3:50 pm

Will give it a thorough testing later today :D

Thanks Bernd!
Image

jacque
VIP Livecode Opensource Backer
VIP Livecode Opensource Backer
Posts: 4697
Joined: Sat Apr 08, 2006 8:31 pm
Location: Minneapolis MN
Contact:

Re: Zoom IDE

Post by jacque » Tue Dec 04, 2018 7:20 pm

I think the main point here is that LC is infinitely customizable. All its parts are built with the same tools you use to create your own stacks, so if you don't like a certain behavior you can customize it as you please. Some things are more challenging than others and require you to be familiar with the copious scripts that run the IDE, but add-ons like Bernd provided are independent and easier to implement. Nothing is set in stone, and if you do create a change you'd like to see as a permanent solution to the IDE, you can submit it to the team and they will consider it.

I think most of us who use LC have created personal tools, shortcuts, and behaviors that make our work easier. Some users have created entire alternate IDEs that largely replace the one you're using now. You aren't limited to only what you get out of the box.
Jacqueline Landman Gay | jacque at hyperactivesw dot com
HyperActive Software | http://www.hyperactivesw.com

Post Reply

Return to “Getting Started with LiveCode - Experienced Developers”