Could not find plist template for device target
Moderators: FourthWorld, heatherlaine, Klaus, kevinmiller, robinmiller
Could not find plist template for device target
I receive the above error while trying to build an iOS standalone in Xcode 8 and LC 8.1.1 (rc1). I couldn't find a reference to a plist in the screens of the builder for iOS. Anyone seen an issue like this?
Thanks for any help.
David Kesler
Thanks for any help.
David Kesler
Re: Could not find plist template for device target
I found the problem. I made iOS 9 the minimum version and set the 32 bit slice only on the iOS pane and it successfully built.
David Kesler
David Kesler
Re: Could not find plist template for device target
and: (seems to only accepting 3 pictures)
So did you set the minimum to 9 only in LC or also in Xcode ?
This is with Xcode8.0 - LC 8.1.1rc1 and MacOs Sierra
Thanks
So did you set the minimum to 9 only in LC or also in Xcode ?
This is with Xcode8.0 - LC 8.1.1rc1 and MacOs Sierra
Thanks
Re: Could not find plist template for device target
It's already reported as a bug, but the solution in the report is not working.
http://quality.livecode.com/show_bug.cgi?id=11357 but this one is closed
check also this which is still open:
http://quality.livecode.com/show_bug.cgi?id=18507
http://quality.livecode.com/show_bug.cgi?id=11357 but this one is closed
check also this which is still open:
http://quality.livecode.com/show_bug.cgi?id=18507
Re: Could not find plist template for device target
Choosing a lower iOS gives me this error:
-
- VIP Livecode Opensource Backer
- Posts: 858
- Joined: Wed Jun 24, 2009 1:17 pm
- Location: Plymouth, UK
- Contact:
Re: Could not find plist template for device target
Oops I think I should have posted in this thread instead of http://forums.livecode.com/viewtopic.ph ... 19#p146919
Anyway, try deleting your installation of LC 8.1.1(rc1) and reinstalling - worked for me...
Anyway, try deleting your installation of LC 8.1.1(rc1) and reinstalling - worked for me...
"...this is not the code you are looking for..."
Re: Could not find plist template for device target
I'm also getting this plist error on LC 8.1.1 (rc1) and using Xcode 8. I tried switching Xcode paths and reinstalling LC without success.
If I try go back to LC 8.1.0 stable I just get this error:
...despite the fact that you can clearly see I have those SDKs still in the default Xcode directory.
So basically now I can't go back to an older version of LC8, and I can't stick with the new one as Xcode 7 yields an ARM error and Xcode 8 yields this plist error.
Not sure what to do.
If I try go back to LC 8.1.0 stable I just get this error:
...despite the fact that you can clearly see I have those SDKs still in the default Xcode directory.
So basically now I can't go back to an older version of LC8, and I can't stick with the new one as Xcode 7 yields an ARM error and Xcode 8 yields this plist error.
Not sure what to do.
-
- Livecode Staff Member
- Posts: 818
- Joined: Fri Feb 06, 2015 4:03 pm
Re: Could not find plist template for device target
Hi all,
Choosing 10.0 as minimum iOS version in the standalone settings will trigger a build error. This is a bug, see http://quality.livecode.com/show_bug.cgi?id=18507 for a workaround, as well as some notes to prevent build errors using Xcode 8.
Best,
Panos
--
Choosing 10.0 as minimum iOS version in the standalone settings will trigger a build error. This is a bug, see http://quality.livecode.com/show_bug.cgi?id=18507 for a workaround, as well as some notes to prevent build errors using Xcode 8.
Best,
Panos
--
Re: Could not find plist template for device target
Hi PanosLiveCode_Panos wrote:Hi all,
Choosing 10.0 as minimum iOS version in the standalone settings will trigger a build error. This is a bug, see http://quality.livecode.com/show_bug.cgi?id=18507 for a workaround, as well as some notes to prevent build errors using Xcode 8.
Best,
Panos
--
I read through your reply and that still does not address my specific issue. Specifically your quote here:
"3. If you are on 10.11.0 < OS X < 10.11.5, you will have to upgrade to 10.11.5 to use Xcode 8 in LC 8.1.1 RC-1"
I'm on 10.11.5 and use Xcode 8 and LC 8.1.1 RC1, but it still gives me the plist error. I have never set the minimum iOS version to 10, I normally use 9.3, but it doesn't work regardless of which one I select. Note I also reinstalled LC during this process to try rectify it, and did the process around switching Xcode paths.
-
- Livecode Staff Member
- Posts: 818
- Joined: Fri Feb 06, 2015 4:03 pm
Re: Could not find plist template for device target
Hi Scoperzor,
Thank you for the follow up. That's weird. I cannot reproduce this error. I suggest you file a bug report at quality.livecode.com so as we investigate this further. Since we cannot reproduce it, please make sure you attach the stack that produces this error (or send it to panos.merakos@livecode.com if it is confidential).
BTW could you please check if there is a file "Settings.plist" in LiveCode 8.1.1 (rc 1)/Contents/Tools/Runtime/iOS/Device-10_0/ ?
This error ("could not find plist template for .." ) is normally thrown if this file is missing.
Best,
Panos
--
Thank you for the follow up. That's weird. I cannot reproduce this error. I suggest you file a bug report at quality.livecode.com so as we investigate this further. Since we cannot reproduce it, please make sure you attach the stack that produces this error (or send it to panos.merakos@livecode.com if it is confidential).
BTW could you please check if there is a file "Settings.plist" in LiveCode 8.1.1 (rc 1)/Contents/Tools/Runtime/iOS/Device-10_0/ ?
This error ("could not find plist template for .." ) is normally thrown if this file is missing.
Best,
Panos
--
Re: Could not find plist template for device target
sorry, doesn't work for me on Sierra which is MAcOS 10.12. & LC8.1.1rc1 & xcode 8.
Also not when setting the version to 9.3 in Livecode.
So avoiding the bug is not working for me.
Have to try the rework of the setting button script as mentioned in the bug report, will test tomorrow.
Also not when setting the version to 9.3 in Livecode.
So avoiding the bug is not working for me.
Have to try the rework of the setting button script as mentioned in the bug report, will test tomorrow.
Re: Could not find plist template for device target
Just tested it.
Setting the iOs version on 9.3 or lower gives this error: But setting it to 10.0 works!
Thanks!
Kind regards,
Sphere
Setting the iOs version on 9.3 or lower gives this error: But setting it to 10.0 works!
Thanks!
Kind regards,
Sphere
-
- VIP Livecode Opensource Backer
- Posts: 135
- Joined: Mon Jul 31, 2006 1:39 am
- Location: New Zealand, Australia, Germany, Japan
- Contact:
Re: Could not find plist template for device target
I get this error when attempting to build with LC 8.1.3 for target iOS from 6-9 (that's all I've attempted so far). Am on OSX 10.9.5.
Any solutions to this generally? I used to be able to build successfully fine.
Any solutions to this generally? I used to be able to build successfully fine.
-
- VIP Livecode Opensource Backer
- Posts: 858
- Joined: Wed Jun 24, 2009 1:17 pm
- Location: Plymouth, UK
- Contact:
Re: Could not find plist template for device target
hi @strongbow - if you're on OS X 10.9 it looks like you should be using Xcode 6.2 - the following is an extract from the Release Notes from LC 8.1.4(rc1)
iOS
iOS deployment is possible when running LiveCode IDE on a Mac, and provided Xcode is installed and has been set in LiveCode Preferences (in the Mobile Support pane).
Currently, the supported versions of Xcode are:
- Xcode 4.6 on MacOS X 10.7
- Xcode 5.1 on MacOS X 10.8
- Xcode 6.2 on MacOS X 10.9
- Xcode 6.2 and 7.2 on Mac OS X 10.10 Xcode 8.2 on MacOS X 10.11
- Xcode 8.2 on MacOS 10.12
"...this is not the code you are looking for..."